Chrome 3/8" 24 Inverted Flare Male Brake Fitting I.F 150 Deg AN3 Male

Chrome 3/8" 24 Inverted Flare Male Brake Fittin 90 Deg AN3 Male- 691-03CH

Used to Connect the T Piece under the Bottom Yoke  and the Line going to the Caliper

Build a line is designed for the end user to easily put together their own hoses. Basic components and hoses already cut to lengths form the basis of your kit. Simply check which thread you have on the vehicle and the length of hose you need and then order the components to suit that application, don't forget new copper washers.

To specify the length of hose, measure between the hole centres of your banjos and then subtract 45mm for each Buildaline fitting.

For instance if the hose on your bike measures 500mm between the hole centres then subtract 90mm for the 2 banjos and your hose length is 410mm.
As the hoses come in 25mm increments you then choose whether a 400mm or a 425mm hose would be closest for your needs.